The Shure M447H is a pre-mounted
Shure M447 DJ cartridge on a headshell. The best selling scratch cart is now super easy to install from the box, straight on to the tonearm.
Combining the Shure unique wide-diameter Type S cantilever with a tracking force of 1.5 to 3.0 grams, the M44-7`s rugged construction is highly durable, but will not unduly wear your vinyl.
With a 9.5 mV output, the highest on the market, the M44-7 produces very powerful, resonant sound.
Replacement stylus for the Shure M447 and Shure M447H are available as
N447.
Main Features of the Shure M447H:
- Skip Resistance: ultra high
- Output: ultra high
- Record Wear: ultra low
- Sound Emphasis: big bass
- Tone Arm Mount Standard 1/2 inch
- Cartridge Type Moving Magnet
- Output Voltage Typical at 1 kHz 9.5 mV RMS at 5 cm/sec peak velocity
- Recommended Load 47 kilohms in parallel with 450pf
- Tracking Force Effective at stylus tip, Range: 1.5 to 3 grams
- Stylus Cantilever Shure Type S, Heat-treated aluminum alloy / tubular, 1.6 mil wall thickness / 34.5 mil diameter
- Diamond Stylus Tip Polished natural gemstone: Spherical
- Radius: 0.7 mil
- Frequency Response Essentially flat from 20 to 20,000 Hz
- Stereo Channel Balance - Within 2 dB
- Channel Separation - Typical at 1 kHz: 20 dB
- Net Weight 6.7 grams
- Height - 15.9 mm
Accessories Included
- Attached flip-down Stylus Guard
- Headshell Screwdriver (Phillips)
- Extra Set of 4 Headshell Wires (4-99)
- Stylus Cleaning Brush
- Headshell Weight (3 grams)
- User Guide
- Mounting hardware
- Stylus guard